Hard Chrome Home contact us catalog price sheet
Hard Chrome Plating Consultants,
Inc.
2196 West 59 th Street and Walworth Ave., Cleveland Ohio
44102
Phone: (216) 631-9090 Fax: (216) 631-9060
Price List: Effective May 1, 2010 (contact us for current prices)
| Part No. | Description |
Price
|
| SA12 | Set of 12 racks and accessories |
4395.00 |
| R105 | 1 inch rack with 5 bottoms and side bars |
345.50 |
| R103 | 1 1/2 inch rack with 3 bottoms and side bars |
370.50 |
| DR03 | Double-top rack w/ 3 bottoms and side bars |
426.00 |
| RT01 | 1 inch rack (top only) |
182.00 |
| RT15 | 1 1/2 inch rack (top only) |
215.00 |
| DT05 | Double-top rack (top only) |
359.00 |
| SB01 | Side bars, 1 inch (set of 2) |
35.00 |
| SB015 | Side bars, 1 1/2 inch (set of 2) |
68.00 |
| SB10 | Offset sidebars 3/8" X 1" (set of 2) |
38.00 |
| SBL1 | Extra long sidebars 3/8" X 1" X 36" long (set of 2) |
41.00 |
| BB05 | Blank bottom 1/2 inch |
10.25 |
| BB01 | Blank bottom 1 inch |
12.00 |
| BB015 | Blank bottom 1 1/2 inch |
18.50 |
| A001 | Angle bottom 1 1/2 x 1 1/2 x 1/4 in. thick |
16.50 |
| V005 | V bottom 1/2 inch |
30.00 |
| V001 | V bottom 1 inch |
35.50 |
| V015 | V bottom 1 1/2 inch |
55.00 |
| CB05 | Clamping bottom 1/2 inch |
36.00 |
| CB01 | Clamping bottom 1 inch |
38.00 |
| CB15 | Clamping bottom 1 1/2 inch |
42.00 |
| SP12 | Production spine rack 12-hole w/set screws |
55.50 |
| PB05 | Production bottom 5-hole |
44.50 |
| PB04 | Production bottom 4-V-slots w/set screws |
62.50 |
| WH01 | 1 inch work holder copper |
30.00 |
| WH15 | 1 1/2 inch work holder aluminum |
35.00 |
| IN01 | Insulators for 1 inch rack (set of 3) |
25.00 |
| IN015 | Insulators for 1 1/2 inch rack (set of 2) |
24.00 |
| INW02 | Insulators for double-top rack (set of 2) |
21.00 |
| CH01 | Cathode hook 1 inch (for RT01) |
36.00 |
| CH15 | Cathode hook 1 1/2 inch (for RT15) |
42.00 |
| CH002 | Cathode hook double-top (for DT05) |
55.00 |
| MF01 | Mold frame work |
95.00 |
| MB01 | Magnet bottom |
68.00 |
| MS02 | Magnets short 3/8 in. thick x 7/8 x 1 7/8 |
7.00 |
| SCR | Rectifier preloader |
275.00 |
|
|
||
|
|
||
| Part No. | Description |
Price
|
| PPS1 | Complete unit for over 700 gal. tank |
1285.00 |
| PPS1Ti | Titanium Framed complete unit for Chromic Plastic Etch bath |
2976.00
|
| PPS2 | Complete unit for under 700 gal. tank |
810.00 |
| PPS3 | Same as PPS2 without rack |
692.00 |
|
Porous
Pot for Fluoride or Heef 25â
Baths that Need 6% Tin Lead Anodes
|
||
| Part No. | Description |
Price
|
| PPS1T | Complete unit for over 700 gal. tank |
1376.00 |
| PPS2T | Complete unit for under 700 gal. tank |
837.00 |
| PPS3T | Same as PPS2T without rack |
747.00 |
| Part No. | Description |
Price
|
| PLF1 | Green Plastisol aluminum Framework for PPS1 |
136.00 |
| RT15Ni | Nickel Plated 1-1/2" Rack top for PPS1Ti |
360.00
|
| PLF1Ti | Special titanium framework for PPS1Ti |
595.00
|
| PSF2 | Green Plastisol aluminum Framework for PPS2 |
126.00 |
| GPT1 | Gray PVC tray for PPS1 |
108.50 |
| GPT2 | Gray PVC tray for PPS2 |
96.25 |
| KYT1Ti | Kynar TM Tray for PPS1Ti |
345.00
|
| WPI-1 | White poly insulators for PPS1 (set of 3) |
28.00 |
| CPIN1 | Cathode poly insulator for PPS1 |
22.00 |
| CPIN2 | Cathode poly insulator for PPS2 and PPS3 |
32.50 |
| SPL WPIN1Ti | White Teflon TM Insulators for PPS1Ti |
150.00
|
| TFINCH | Teflon TM Insulators for cathode hook for PPS1Ti |
50.00
|
| Part No. | Description |
Price
|
| PPR1 | 12 x 24 x 3 in. rectangular pot for PPS1 |
397.00 |
| PPR2 | 3 3/4 dia. x 18 in. high pot for PPS2 |
197.00 |
| PRC8 | 8 5/8 dia. x 25 1/2 x 1/4 in. thick for Cosmosâ unit |
440.00 |
| PPR3/12/36 |
3 x 12 x 36 inches high rectangular pot for PPS36 |
495.00
|
| Pots are also available in additional sizes |
CALL
|
|
| CAZ1 | Copper anode Z-bar for PPS1 - 3/8 x 1 1/2 x 13 inch. |
52.75 |
| CCB1 | Aluminum cathode cross bar for PPS1 - 3/8 x 2 x 13 inch |
34.50 |
| CCB2 | Aluminum cathode cross bar for PPS - 3/8 x 1 x 18 inch |
28.00 |
| Part No. | Description |
Price
|
| PPA1 | 10 x 29 inch anode for PPS1 (EACH) |
169.50 |
| PPA1C | 10 x 26 inch cathode for PPS1 |
165.00 |
| PPA2 | 5 dia. x 23 inch anode for PPS2 |
190.00 |
| PPA2C | 3 1/2 dia. x 19 inch cathode for PPS2 |
166.00 |
|
6% Tin
Lead Mats for PPS1T and PPS2T
|
||
| Part No. | Description |
Price
|
| PPA1T | 10 x 29 inch anode for PPS1(EACH) |
212.00 |
| PPA1CT | 10 x 26 inch cathode for PPS1 |
198.50 |
| PPA2T | 5 dia. x 23 inch anode for PPS2 |
213 .00 |
| Part No. | Description |
Price
|
| DRA605 | DURA 60 (per gallon - 5 gal. min.) |
62.00
|
| DRA6015 | DURA 60 (15 gallons or more) |
57.00
|
| SMXL88 | Peelable stopoff laquer (2 gallons minimum) |
60.00 |
| D-CHROMIC | NEW Powder Soap to remove Chromic Acid stains 9 pound box |
75.00
|
| Part No. | Description |
Price
|
| SF08 | Set of fixtures for tank anodes |
4849.00 |
| CC01 | 1 inch crossover bar cathode |
51.25 |
| CC15 | 3/8 x 1 1/2 in. crossover bar cathode |
65.00 |
| CC55 | 1/2 x 1 1/2 in. crossover bar cathode |
100.00 |
| CC52 | 1/2 x 2 inch crossover bar cathode |
120.00 |
| CA15 | 3/8 x 1 1/2 in. crossover bar anode |
80.00 |
| CA51 | 1/2 x 1 1/2 in. crossover bar anode |
110.50 |
| CA52 | 1/2 x 2 inch crossover bar anode |
120.50 |
| DBA1 | Double bar anode crossover bar |
175.50 |
| Part No. | Description |
Price
|
| VC01 | 1000 Amp center hole work holder |
275.00 |
| VC02 | 2000 Amp center hole work holder |
375.50 |
| VB01 | 1000 Amp V block work holder |
312.00 |
| VB02 | 2000 Amp V block work holder |
395.00 |
| VB03 | 3000 Amp V block work holder |
698.00 |
| TT02 | Two reversing tabs for tank anodes |
50.00 |
| LV01 | Low voltage rheostat board |
180.00 |
| Part No. | Description |
Price
|
| KSTS | Sulfate test kit |
903.00 |
| BAHY | Baume hydrometer 0 to 35 degrees |
44.55 |
| CHY | Chromometer hydrometer (directly reads oz. per gallon of chromic acid content) |
67.00 |
| FT | Floating thermometer |
38.50 |
| CR | Trivalent chrome test kit |
170.00 |
| T280 | Magnetic pencil thickness gauge |
235.00 |
| AHM1 | Amp hour meter (call with meter shunt rectifier ratings) |
315.00 |
| DHT1 | Sclerascope steel hardness tester (hand held) |
120.00 |
|
|
||
| Part No. | Description |
Price
|
| CANCEL | CANCEL Fume suppressant (5 gallon pail) |
450.00 |
| CALL FOR QUANTITY DISCOUNT |
|
|
|
Solid
Polypropylene Floating Balls
|
||
| Part No. | Description |
Price
|
| SPFB | Available in 1 and 1 1/2 in. dia (tell us the top surface area of tank in square feet) |
CALL |
| Part No. | Description |
Price
|
| HM03 | Hook mold |
55.00 |
| FM04 | Flat leed mold |
230.00 |
| Part No. | Description |
Price
|
| AFO1 | Aluminum foil (18 in. x 1.5 mil. thick 20 lb. 330 feet long - in dispenser box) |
127.00 |
| 1.5 mil. thick 50 yard roll (per case) (With Liner) |
|
|
| AF40C1 | Aluminum foil sticky tape (1 in. wide) |
205.00 |
| AF40C2 | Aluminum foil sticky tape (2 in. wide) |
205.00 |
| AF40C3 | Aluminum foil sticky tape (3 in. wide) |
195.00 |
| 1.5 mil. thick 50 yard roll (each) (With Liner) |
|
|
| AF401 | Aluminum foil sticky tape (1 in. roll) |
7.75 |
| AF402 | Aluminum foil sticky tape (2 in. roll) |
14.50 |
| AF403 | Aluminum foil sticky tape (3 in. roll) |
19.25 |
| Part No. | Description |
Price
|
| SM500.5 | PVC non-sticky tape (1/2 in. wide) |
1.48
|
| SM500.75 | PVC non-sticky tape (3/4 in. wide) |
1.90 |
| SM5001 | PVC non-sticky tape (1 in. wide) |
2.45 |
| SM5001.5 | PVC non-sticky tape (1 1/2 in. wide) |
3.65 |
| SM5002 | PVC non-sticky tape (2 in. wide) |
4.95 |
| SM5003 | PVC non-sticky tape (3 in. wide) only manufactured in USA in 500 foot roll |
7.55 |
|
New Imported
Yellow PVC Tape (Sticky) 108 foot roll
|
||
| Part No. | Description |
Price
|
| SM947014 | PVC sticky tape (1/4 in. wide) |
1.80
|
| SM94701.5 | PVC sticky tape (1/2 in.wide) |
3.84
|
| SM94701.75 | PVC sticky tape (3/4 in. wide) |
2.50
|
| SM9471 | PVC sticky tape (1 in. wide) |
3.20
|
| SM947015 | PVC sticky tape (1.5 in. wide) check |
4.80
|
| SM9472 | PVC sticky tape (2 in. wide) check |
6.40
|
|
|
||
|
Yellow
PVC Tape (Non- sticky)
Made in USA 500 foot roll For case lot quanity price is $5.25/lb |
||
| Part No. | Description |
Price
|
| YT034 | PVC non-sticky tape (3/4 in. wide) |
6.16 |
| YT01 | PVC non-sticky tape (1 in. wide) |
7.43 |
| YT015 | PVC non-sticky tape (1 1/2 in. wide) |
8.05 |
| YT02 | PVC non-sticky tape (2 in. wide) |
11.50 |
| YT03 | PVC non-sticky tape (3 in. wide) |
22.18 |
|
Yellow
PVC Tape (Sticky)
Made in USA 66 foot roll |
||
| Part No. | Description |
Price
|
| YTS34 | PVC sticky tape (3/4 in. wide) | 5.65 |
| YTS1 | PVC sticky tape (1 in. wide) |
6.41 |
| YTS2 | PVC sticky tape (2 in. wide) |
13.56 |
| YTS3 | PVC sticky tape (3 in. wide) |
20.19 |
| Part No. | Description |
Price
|
| SM8001 | SM800 Lead tape (1 in. wide) 9 ROLLS PER CASE |
278.75
|
| SM8002 | SM800 Lead tape (2 in. wide) 9 ROLLS PER CASE |
371.50 |
|
3M
Lead Tape (With Liner)
|
||
| Part No. | Description |
Price
|
| LF3M12 | 3M 420 Lead tape (1/2 in. wide) |
29.10
|
| LF3M034 | 3M 420 Lead tape (3/4 in. wide) |
35.85
|
| LF3M1 | 3M 420 Lead tape (1 in. wide) |
44.75
|
| LF3M112 | 3M 420 Lead tape (1 1/2 in. wide) |
62.20
|
| LF3M2 | 3M 420 Lead tape (2 in. wide) |
89.60
|
|
3M
Lead Tape (Without Liner)
|
||
| Part No. | Description |
Price
|
| LF3M014 | 3M 421 Lead tape (1/4 in. wide) |
15.45 |
| LF3M012 | 3M 421 Lead tape (1/2 in. wide) |
22.95
|
| LF3M034 | 3M 421 Lead tape (3/4 in. wide) |
35.85 |
| LF3M01 | 3M 421 Lead tape (1 in. wide) |
38.30
|
| LF3M015 | 3M 421 Lead tape (1 1/2 in. wide) |
57.50
|
| LF3M02 | 3M 421 Lead tape (2 in. wide) |
76.85
|
| Part No. | Description |
Price
|
| LM01CP | Soft chemical lead |
62.50
|
| LM01A1 | 1% Antimony lead |
67.25
|
| LM01A6 | 6% Antimony lead |
70.50
|
| LM01T6 | 6% Tin lead |
76.50
|
|
Lead Mats 26.5 in. x 16.5 in. x 3/8 in. |
||
| LM26A6 | 6% Antimony lead |
309.00 |
| LM26T | 6% Tin lead |
335.00 |
| Part No. | Description |
Price
|
| LWSP | 6% Antimony (50 pound spool) |
245.00 |
| LWSP | 400 Lbs of lead wire - call for low best price! |
Call
|
| LWx/x | Sold in small quanities by the pound, state desired diameter check |
10.50 /lb. |
| LEAD12 | 12 inch by 24 inch by 1/4 thick 6% Antimony |
155.00
|
| Lead sheet | Large quanities of 6 % antimony sheet lead call for best price |
CALL
|
| LEAD /1248 | 12 inch by 48 inch by 1/4 inch thick 6% Antimony |
290.00 |
| · Custom made conforming lead mat anodes - any size or shape |
CALL |
|
| · Lead mat or bar anodes with hooks |
|
|
| · Extruded lead bar stock (available in many shapes) |
|
|
add lAB ANALYSIS
Plating Equipment (call for discount prices)
· Rectifiers - new or rebuilt (1 year warranty) USED AS-IS
· Heating and cooling coils
· Titanium Electric heaters
· Temperature Controls
· Lead or plastic lined tanks and exhaust hoods
· Copper bus bars
· 2024 aluminum bar stock
· Fume scrubbers and blowers
New: Plastic caps, plugs, and stop-off tape and lacquer - call or e-mail for prices.
Hard
Chrome Plating Consultants, Inc., 2196 West 59 Street, Cleveland Ohio
44102
Phone: 216-631-9090 Fax: 216-631-9060